A1
| Intake manifold - exploded view |
| 1 - | Guide tube |
| q | For oil dipstick |
| 2 - | Seal |
| q | Renew |
| 3 - | Seals |
| q | Renew |
| 4 - | Bolt |
| q | Tighten in diagonal sequence, working from centre outwards |
| q | 8 Nm |
| 5 - | Fuel return line |
| 6 - | Bolt |
| q | 9 Nm |
| 7 - | Bolt |
| q | 9 Nm |
| 8 - | Intake manifold |
| q | With intake manifold flap motor -V157- and intake manifold flap potentiometer -G336- |
| q | Do not dismantle |
| q | Removing and installing → Chapter |
| 9 - | Bracket |
| q | For exhaust gas recirculation cooler change-over valve -N345- |
| 10 - | Bolt |
| q | 9 Nm |
| 11 - | Exhaust gas recirculation cooler change-over valve -N345- |
| 12 - | Gasket |
| q | Renew |
| 13 - | Bolt |
| q | Tightening torque → Rep. gr.26 |
| 14 - | Pipe for exhaust gas recirculation |
| q | To exhaust gas recirculation cooler |
| 15 - | Screw-type clip |
| q | Tightening torque → Rep. gr.26 |
| 16 - | Connection |
| q | For exhaust gas recirculation |
| 17 - | Bolt |
| q | 8 Nm |
| 18 - | Seal |
| q | Renew |
| 19 - | Throttle valve module -J338- |
| q | With throttle valve potentiometer -G69- |
| q | Removing and installing → Chapter |
| 20 - | Bolt |
| q | 8 Nm |
| 21 - | Bolt |
| q | Tightening torque → Rep. gr.17 |
| 22 - | Clip |
