A1
Exploded view - electrohydraulic power steering |
t | There is no provision for repairing the steering box. Install a new steering box in the event of malfunction. |
t | To lubricate the steering box, use only steering box grease. However, do not apply too much grease to the steering box. The breather holes must remain free, otherwise the boot can be damaged. |
t | Fluid type: hydraulic fluid |
t | Quantity of fluid in system: approx. 0.8 ltr. |
1 - | Bolt |
q | 6 Nm |
2 - | Heat shield |
q | Not fitted on all engine versions |
3 - | Nut |
q | 20 Nm +90° |
q | Always renew if removed |
4 - | Wheel bearing housing |
5 - | Seal |
q | Always renew if removed |
6 - | Banjo bolt |
q | 40 Nm |
7 - | Pressure line |
8 - | Return hose |
9 - | Union screw |
q | 30 Nm |
10 - | Seal |
q | Always renew if removed |
11 - | Steering box |
q | Removing and installing → Chapter |
12 - | Subframe |
13 - | Bolt |
q | 50 Nm +90° |
q | Always renew if removed |