audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing cigarette lighter illumination bulbL28 > < Exploded view of cigarette lighter, 12 V electric socket

A1

Removing and installing cigarette lighterU1
Removing and installing cigarette lighter -U1-
Special tools and workshop equipment required
   
t  Puller -T40148-
  W00-10578
Removing
–  Release tabs -2- on puller -T40148- must engage in recesses in cigarette lighter/12 V socket -3--arrow-; for this purpose, push threaded rod -1- downwards as far as stop.
  A90-10090
–  Pull lighter/dummy cover off cigarette lighter -U1-.
–  Insert puller -T40148- into cigarette lighter/12 V socket -1- as far as stop.
–  Turn knurled wheel -2- on puller -T40148- clockwise as far as stop.
  A90-10153
l  The piston -2- moves upwards and the release tabs -1- on puller -T40148- spread apart -arrows-.
–  Use puller -T40148- to pull cigarette lighter -U1- out of illuminated ring with cigarette lighter illumination bulb -L28-.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
  WARNING
Risk of injury.
t  After detaching puller -T40148- check that retaining tabs for lighter are not bent.
t  If retaining tabs are bent they must be bent back to prevent lighter from ejecting.
  A90-10087
–  Detach support -1- from puller -T40148-.
–  Push piston downwards and hold in this position.
–  Turn knurled wheel -4- on puller -T40148- anti-clockwise -arrow-; this will open release tabs -2- on cigarette lighter -U1--item 3- and puller -T40148- can be removed.
  A90-10091

Removing and installing cigarette lighter illumination bulbL28 > < Exploded view of cigarette lighter, 12 V electric socket