Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing glove compartment light switchE26 >
< Removing and installing mounting for switch panel (bottom)
A1
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Lights and switches in dash panel
Removing and installing glove compartment lightW6
Removing and installing glove compartment lightW6
Removing and installing glove compartment light -W6-
Removing
–
Turn light switch to position „0“.
–
Use a flat screwdriver to press in retaining tab
-1-
and pry out glove compartment light
-2-
.
–
Unplug electrical connector
-3-
.
–
Remove bulb
-1-
from bulb holder
-2-
on reverse side of glove compartment light.
Installing
Installation is carried out in the reverse order; note the following:
–
Insert glove compartment light in opening and engage on opposite side.
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Lights and switches in dash panel
Removing and installing glove compartment lightW6
Removing and installing glove compartment light switchE26 >
< Removing and installing mounting for switch panel (bottom)