audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear parking aid senders G203/G204/G205/G206 > < Removing and installing rear parking aid warning buzzerH15

A1

Removing and installing front parking aid senders G252/G253/G254/G255
Removing and installing front parking aid senders -G252-/-G253-/-G254-/-G255-
   
Removing
Outer senders:
–  Removing headlight housing: halogen headlights → Chapter, gas discharge headlights → Chapter.
–  Press both retaining tabs apart -arrows- and at the same time press out sender -2- from outside to inside.
–  Unplug electrical connector -1- on sender.
  A94-10267
Inner senders:
–  Reach through openings in radiator grille, press both retaining tabs -arrows- and take out mounting -1-.
–  Unplug electrical connector -2-.
  A94-10999
–  Press both retaining tabs apart -arrows- and at the same time press sender -2- out of mounting -1-.
Installing
Installation is carried out in the reverse order; note the following:
Outer senders:
–  Install headlight housing: halogen headlights → Chapter, gas discharge headlights → Chapter.
  A94-11018

Removing and installing rear parking aid senders G203/G204/G205/G206 > < Removing and installing rear parking aid warning buzzerH15