audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuse holder BSB > < Overview of electronics box in engine compartment, wiring junction and battery fuse holder

A1

Removing and installing bracket for fuse holder BSB
Removing and installing bracket for fuse holder B -SB-
   
Removing
–  Disconnect earth cable from battery with ignition switched off → Chapter.
–  Open cover -2- over positive battery terminal.
–  Remove nut -3-.
–  Release retaining tabs -arrow- with a small screwdriver -4-.
–  Detach bracket -1- for fuse holder B from battery and from battery clamp of positive cable and move to one side with wiring attached.
Installing
Installation is carried out in the reverse order; note the following:
–  Press bracket onto battery until retaining tabs engage audibly.
–  Connect battery. Steps required → Anchor.
  A27-10346

Removing and installing fuse holder BSB > < Overview of electronics box in engine compartment, wiring junction and battery fuse holder