audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing securing bar for fuse holder BSB > < Overview of electronics box in engine compartment, wiring junction and battery fuse holder

A1

Removing and installing fuse holder BSB
Removing and installing fuse holder B -SB-
   
Removing
–  Disconnect earth cable from battery with ignition switched off → Chapter.
–  Release retaining tabs -1, 3--arrow- using screwdriver -2- and detach cover -4-.
  A97-11260
–  Mark assignment of electrical wiring -3 ... 8- at screw connections for re-installation.
–  Unscrew nuts and pull electrical wiring out of clamps.
–  Remove nut -1-.
–  Release fuse holder B -item 2- at front side and disengage at reverse side.
–  Remove fuse holder B.
Installing
l  Tightening torque → Fig.
Installation is carried out in the reverse order; note the following:
–  Connect battery. Steps required → Anchor.
  A97-11261

Removing and installing securing bar for fuse holder BSB > < Overview of electronics box in engine compartment, wiring junction and battery fuse holder