Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking poly V-belt pulley with free-wheel >
< Removing and installing poly V-belt pulley without free-wheel
A1
Vehicle electrics
Electrical system; General information / Starter-current supply-CC
Checking and servicing alternator
Removing and installing poly V-belt pulley with free-wheel
Removing and installing poly V-belt pulley with free-wheel
Removing and installing poly V-belt pulley with free-wheel
Special tools and workshop equipment required
t
Adapter -3400-
t
8 mm hexagon socket or TORX T50 socket
Removing
–
Remove alternator
→ Electrical system; Rep. gr.27
.
–
If fitted, press off protective cap on alternator pulley.
–
Counterhold on belt pulley using adapter -3400- and turn alternator shaft clockwise to loosen.
Installing
Installation is carried out in the reverse order; note the following:
–
Turn alternator shaft anti-clockwise to tighten.
–
Clip protective cap onto alternator pulley.
Tightening torque
Component
Nm
Poly V-belt pulley with free-wheel to alternator
80
Vehicle electrics
Electrical system; General information / Starter-current supply-CC
Checking and servicing alternator
Removing and installing poly V-belt pulley with free-wheel
Checking poly V-belt pulley with free-wheel >
< Removing and installing poly V-belt pulley without free-wheel