audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing door lock (front) > < Removing lock cylinder and door handle

A2

Installing door handle
   
Installing door handle
–  Install door handle, guiding it through opening in door panel (front).
–  The seal on the front of the door handle -1- must be inserted behind the door panel and the retaining tab must engage behind the catch mechanism -2-.
  A57-0257
–  When installed correctly, the retaining tab -1- on the door handle engages behind the catch mechanism -2-.
–  Fit the lock cylinder into the door handle mounting.
  A57-0255
–  Turn screw -2- in clockwise direction as far as the stop.
–  This releases the retaining tab -arrow- locking the catch mechanism -1- in place and the door handle is then pulled towards the inside.
  A57-0259

Removing and installing door lock (front) > < Removing lock cylinder and door handle