A2
Removing and installing door lock (rear) |
1 - | Rear door |
2 - | Door lock (rear) |
q | Removing: |
– | Remove door trim → General body repairs, interior; Rep. Gr.70. |
– | Remove mounting panel → Chapter. |
– | Remove door handle. |
– | Remove door subframe. |
– | Remove bolts with washers → Item. |
3 - | Bowden cable |
q | To remove, unclip from door lock -arrow c-. |
q | Swivel Bowden cable approx. 90° downwards and detach from operating rod for door lock. |
q | To install, engage Bowden cable in direction of -arrow a-, swivel upwards approx. 90°, and then clip into door lock -arrow c-. |
4 - | Cover cap |
5 - | Grommet |
6 - | Backing plate |
q | Slide on sideways to install. |
7 - | Bolt with washer |
q | 20 Nm |