A2
Removing and installing glove box |
1 - | Glove box |
t | Removing |
q | Remove trim for A-pillar (bottom) → Chapter. |
– | Open glove box lid. |
– | Unclip coin holder -5- from below. |
– | Remove bolts -3- (3x). |
– | Remove bolts -4- (2x). |
– | Unplug connector -2-. |
– | Unplug connector to key-operated switch for front passenger's airbag → Fig.. |
– | Remove switch for deactivation of front passenger's airbag → Chapter. |
2 - | Connector |
3 - | Bolts (3x) |
q | Tightening torque: 4 Nm |
4 - | Bolts (2x) |
q | Tightening torque: 4 Nm |
5 - | Coin holder |
|