A2
| Removing and installing steering wheel |
| 1 - | Steering wheel |
| t | Removing |
| – | Remove airbag unit → Chapter. |
| – | Turn steering wheel to centre position (wheels in straight-ahead position). |
| – | Unscrew bolt -4-. |
| – | Unplug connectors -2- and -10-. |
| t | Installing |
| – | Attach steering wheel in centre position (wheels in straight-ahead position). |
| – | Make sure connectors are heard to fully engage. |
| – | Replace bolt -4-. |
| t | Tightening torque → Rep. Gr.48 |
| – | Install airbag unit ⇒ Page → Chapter. |
| 2 - | Plug for coil connector |
| 3 - | Connector for airbag unit |
| 4 - | Multi-point socket head bolt |
| q | Tightening torque → Rep. Gr.48 |
| q | Always to be replaced |
| 5 - | Airbag unit |
| 6 - | Threaded bushing |
| 7 - | Torx bolts (T 30) |
| q | 7 Nm |
| 8 - | Torx wrench (T 30) |
| 9 - | Coil connector with slip ring |
| 10 - | Connector for heated steering wheel |
