A2
Removing and installing centre dash panel holder |
1 - | Right holder |
q | Remove rear centre console → Chapter. |
q | Remove selector housing → Rep. Gr.34. |
q | Remove rear air duct. |
q | Unscrew bolts -2- (2x). |
q | Unscrew bolts -3- (2x). |
q | Take out right holder -1-. |
2 - | Bolts (2x) |
q | Tightening torque 12 Nm |
3 - | Bolts (2x) |
q | Tightening torque 12 Nm |
4 - | Bolts (2x) |
q | Tightening torque 12 Nm |
5 - | Left holder |
q | Remove rear centre console → Chapter. |
q | Remove selector housing → Rep. Gr.34. |
q | Remove rear air duct. |
q | Unscrew bolts -4- (2x). |
q | Unscrew bolts -3- (2x). |
q | Take out left holder -5-. |