A2
Removing and installing rear lid trim |
1 - | Lower trim |
q | Start on grip moulding side |
q | Apply screwdriver in vicinity of clips -2- to unfasten trim -1- at clips -2- (9x). |
2 - | Clips |
3 - | Upper trim |
q | Unfasten trim -3- at clips -4- (3x). |
q | Carefully bend trim -3- and detach trim -3-. |
q | Install in reverse order of removal. |
4 - | Clips |
1 - | Left side trim |
q | Upper and lower trim removed |
q | Unfasten side trim -1- at clips -3- (3x). |
q | Start by inserting retainer tab -4- on installation. |
2 - | Right side trim |
q | Upper and lower trim removed |
q | Unfasten side trim -2- at clips -5- (3x). |
q | Start by inserting retainer tab -6- on installation. |
3 - | Clips |
4 - | Retainer tab |
5 - | Clips |
6 - | Retainer tab |