Audi Workshop Service and Repair Manuals

Separating engine and gearbox Special tools and workshop equipment required

t  Hooks -10 - 222 A /2-

t  Shackle -10 - 222 A /12-

t  Workshop hoist -VAS 6100-

Procedure l  Engine/gearbox assembly removed and attached to engine support -T40075-. –  Detach bracket -2- for connector from centre hex stud -1- and remove centre hex stud. –  Remove top centre hex stud and detach starter.

–  Attach shackle -10 - 222 A /12- to gearbox. –  Attach workshop hoist -VAS 6100- with hook -10 - 222 A /2- to shackle -10 - 222 A /12-.

–  Remove bolts -1 ... 5- securing gearbox to engine.   Note Disregard -item A-. –  Detach gearbox from engine.