audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing poly V-belt pulley for crankshaft > < Removing and installing poly V-belt

A2

Removing and installing tensioner for poly V-belt
Removing and installing tensioner for poly V-belt
   
Removing
–  Detach bonnet → Chapter.
–  Pull oil dipstick out of guide tube.
–  Detach guide tube -1- for oil dipstick (press release tabs).
–  Detach oil filler pipe -2- from oil filler reservoir.
–  Remove poly V-belt → Chapter.
  A10-0809
–  Remove bolt -arrow-, detach connection with guide tube for oil dipstick and oil filler pipe from sump.
  A17-10348
–  Remove bolt -arrow- and take off tensioner -1- for poly-V-belt.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Install connection with guide tube for oil dipstick and oil filler pipe → Fig..
–  Install poly V-belt → Chapter.
  A13-10579

Removing and installing poly V-belt pulley for crankshaft > < Removing and installing poly V-belt