audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Fuel filter for fuel system without fuel return pipe - exploded view > < Fuel filter for a fuel system with fuel return pipe - exploded view of components

A2

Removing and installing fuel filter for a fuel system with fuel return pipe
Removing and installing fuel filter for a fuel system with fuel return pipe
Special tools and workshop equipment required
   
t  Used oil collection and extraction unit -V.A.G 1782-
  W00-10211
Removing
–  Remove heat shield at front right of fuel tank-arrows-.
–  Place used oil collection and extraction unit -V.A.G 1782- under fuel filter.
  WARNING
The fuel system is pressurised. Before opening the system place a cloth around the connection. Then dissipate pressure by carefully unfastening the connection.
  A20-0715
–  Disconnect fuel pipes -1- and -2- by pressing the release tabs.
–  Unscrew bolt -3-.
–  Remove fuel filter.
Installing
Installation is carried out in the reverse order; note the following:
l  Flow direction is marked with arrows on filter housing.
l  The filter housing has to come into contact with the guide.
Tightening torque
  A20-0716
ComponentNm
Retaining clamp for fuel filter3

   

Fuel filter for fuel system without fuel return pipe - exploded view > < Fuel filter for a fuel system with fuel return pipe - exploded view of components