Audi Workshop Service and Repair Manuals > A2 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Horn | Removing and installing horn and dual tone horn H1

Removing and installing horn and dual tone hornH1

Removing and installing horn and dual tone horn -H1-

Removing

–	Remove the front bumper → Rep. Gr.63.

Horn at right on lock carrier:

–	Remove bolt -2-.

–	Detach the horn and dual tone horn -H1- at the lock carrier.

Note

To remove the holder -1- for the horn and dual tone horn -H1-, completely unscrew the nut -arrow-.

–	Detach electrical connector.

Horn at front on lock carrier:

–	Unscrew nut -2-.

–	Detach the horn and dual tone horn -H1- at the lock carrier.

–	Unplug the connector -1-.

Installing

Install in reverse order, paying attention to the following:

–	Install the front bumper → Rep. Gr.63.

Tightening torques

Component		Nm
Horn and dual tone horn -H1- to holder		11
Holder for horn and dual tone horn -H1- to lock carrier		11

Audi Workshop Service and Repair Manuals