audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing switches and instruments illumination regulator E20 / headlight range control regulator E102 > < Switches

A2

Removing and installinglight switchE1
Removing and installinglight switch -E1-
   
Removing
–  Switch off ignition and remove ignition key.
–  Turn light switch to “0” position.
–  Press light switch -arrow 1- and, at the same time, turn it to right -arrow 2-.
–  Hold the switch in this position and pull it out of the switch housing -arrow 3-.
–  Unplug the connectors.
Installing
Install in reverse order, paying attention to the following:
–  Press switch into switch mounting until catch engages.
  A96-0390

Removing and installing switches and instruments illumination regulator E20 / headlight range control regulator E102 > < Switches