Audi Workshop Service and Repair Manuals > A2 > Vehicle electrics | Radio, Telephone and Navigation System, Self-diagnosis | Self diagnosis, V.A.G Inspection Service | Radio system self-diagnosis

Interrogating fault memory

Procedure

–	Start radio self-diagnosis → Chapter.

Indicated on display:

–	Press keys 0 and 2 (“Interrogating fault memory”).

Rapid data transfer                HELP

Select function XX

Indicated on display:

–	Confirm entry by pressing Q key.

Rapid data transfer                    Q

02 - Interrogating fault memory

The number of stored faults appears on the display.

The stored faults are displayed and printed out consecutively.

–	Check fault printout against fault table → Chapter and eliminate fault.

If “No fault detected” is displayed, tester returns to initial setting after pressing → key.

X fault(s) detected

Indicated on display:

No fault detected                  ->

Indicated on display:

–	Press keys 0 and 6 (“End of output”).

–	Confirm entry by pressing Q key.

–	Switch off ignition.

–	Unplug connectors to fault reader -V.A.G 1551-.

Rapid data transfer                HELP

Select function XX

Audi Workshop Service and Repair Manuals