Audi Workshop Service and Repair Manuals > A2 > Vehicle electrics | Radio, Telephone and Navigation System, Self-diagnosis | Self diagnosis, V.A.G Inspection Service | Telematics self-diagnosis | Adaption | Aerial test selection

Aerial test selection - Adaption channel 05

It is possible to determine which GSM aerial is to be monitored by the control unit. A fault is entered if there is no function.

At present only the emergency aerial can be tested. “2 = Testing GSM emergency aerial” must therefore be set.

Indicated on display:

–	Press keys 0 and 5 (“Channel 5”).

Note

An incorrect entry can be corrected after pressing C key.

–	Confirm entry by pressing Q key.

Adaption

Enter channel number XX

Indicated on display:

Channel selected and aerial test currently stored are displayed on top line.

0 = No test

1 = Testing of GSM main aerial

2 = Testing of GSM emergency aerial

3 = Testing of both GSM aerials

–	Press → key.

Channel 5     Adaption      0        ->

Test OFF

Indicated on display:

–	Enter new adaption value (00002) if GSM emergency aerial is to be tested.

–	Confirm entry by pressing Q key.

Channel 5     Adaption      0        ->

Enter adaption value XXXXX

Indicated on display:

–	Press → key.

Channel 5     Adaption      2        ->

Test ON Emergency aerial

Indicated on display:

–	Confirm entry by pressing Q key.

Channel 5     Adaption      2         Q

Store altered value?

Indicated on display:

–	Press → key.

Channel 5     Adaption      2        ->

Altered value stored

Indicated on display:

–	Press keys 0 and 6 (“End of output”).

–	Confirm entry by pressing Q key.

Rapid data transfer                HELP

Select function XX

Audi Workshop Service and Repair Manuals