A3 L4-2.0L Turbo (BPY) (2006)
/Page-5620001.png)
CD Changer: Service and Repair
CD Changer
Special tools, testers and auxiliary items required
‹› Radio release tool (T10057)
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
Removing:
-
Open glove compartment.
-
Insert two radio release tools (T10057) into slots on CD Changer (R41) until they engage. Pointed ends of grips must face outwards.
-
Pull unit out of mounting frame.
-
Disconnect electrical connection.
-
Remove release tools from unit.
Installing:
-
Connect electrical connection.
-
Slide CD Changer (R41) into mounting frame until it engages.
-
After installation, check wiring connection to Radio (R) => [ Radio and CD Changer Wiring Connection, Checking ] See: Testing and
Inspection/Component Tests and General Diagnostics/Radio and CD Changer Wiring Connection, Checking.
