audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Cabin Ventilation Grille > < Rear Bumper Cover / Fascia|Service and Repair|Page 16138
Page 1
background image

Cabin Ventilation Duct: Testing and Inspection

Air Extraction Vent, Checking 

-

Check ventilation channels to both ventilation frames -A- in luggage compartment (left and right) for throughput.
-

Sealing lips -B- in ventilation frames -A- must move freely and close by themselves.

-

Blocked channels to ventilation frames or jammed sealing lips may cause windows to fog up.

NOTE: 
-

In this illustration, ventilation frame -A- is depicted with rear bumper removed.

-

For forced air extraction, one ventilation frame -A- each is installed on left and right.

-

So that sealing lips -B- close correctly, ventilation frame -A- must be installed on proper side (smaller radius -C- at top).

-

In order for the passenger compartment ventilation to function properly, the vent openings -A- and -B- in the luggage compartment trim on left
and right must not be closed.

Cabin Ventilation Grille > < Rear Bumper Cover / Fascia|Service and Repair|Page 16138