A3 L4-2.0L Turbo (BPY) (2006)
-
Cover light lens - 8 - clipped into storage compartment trim - 7 -.
-
Lining mat - 3 - installed.
-
Storage compartment trim - 7 - installed.
-
Grab handle installed.
-
Clip in front storage compartment cover - 2 -.
3
-
Lining mat
Removing
-
Remove heater controls or remove Climatronic Control Module J255 (A/C control head).
-
Unclip front storage compartment cover - 2 -.
-
Unclip storage compartment trim - 7 -.
Vehicles with manual transmission:
-
Remove cover with selector lever boot.
Vehicles with automatic transmission:
-
Version I: Remove selector lever cover.
-
Version II: Remove selector lever boot and cover.
All:
-
Remove bolts - 4 - (qty. 2)
-
Remove omega clips - 5 -.
-
Remove lining mat - 3 -.
Installing
Maintain the following assembly sequence:
-
Insert lining mat - 3 -.
-
Position omega clip installation position - 5 -.
-
Install screws - 4 - and tighten to specified torque.
-
Grab handle installed.
-
Clip in storage compartment trim - 7 -.
-
Install heater controls or install Climatronic Control Module J255 (A/C control head).
-
Clip in front storage compartment cover - 2 -.
-
Clip in shift mechanism cover.
4
-
Screws - 3.5 Nm
-
Qty. 2
5
-
Omega clips
-
Qty. 2
-
Maintain installation position as shown in illustration
6
-
Center console
7
-
Storage compartment trim
Removing
-
Remove heater controls or remove Climatronic Control Module J255 (A/C control head).
-
Unclip front storage compartment cover - 2 -.
-
Unclip storage compartment trim - 7 -.
Installing
Maintain the following assembly sequence:
-
Lining mat - 3 - installed.
-
Clip in storage compartment trim - 7 -.
-
Install heater controls or install Climatronic Control Module J255 (A/C control head).
-
Grab handle installed.
-
Clip in front storage compartment cover - 2 -.
8
-
Cover light lens
-
clipped into storage compartment trim - 7 -