A3 L4-2.0L Turbo (BPY) (2006)
Trim Panel: Service and Repair
Upper B-Pillar Trim, Removing and Installing
Upper B-pillar Trim, Removing And Installing
Removing
CAUTION: Observe safety precautions for work on airbags.
-
Remove lower A-pillar trim
-
Remove sill panel trim
-
Remove lower B-pillar trim.
-
Remove bolt - 1 - on three-point seatbelt lower anchorage point - 2 -.
-
Remove bolts - 1 -.
-
Remove lower B-pillar trim from B-pillar until guide pins - 2 - are freed up.
-
Then remove trim downward.
Installing
Installation is reverse of removal, but note the following:
-
Slide belt height adjuster on B-pillar all the way down.
-
Position B-pillar trim in installation position.
-
The B-pillar trim adjustment handle must engage on belt height adjuster release lever 2 - and pins - 1 -.