A3 L4-2.0L Turbo (BPY) (2006)
Trim Panel: Service and Repair
Lower B-Pillar Trim, Removing and Installing
Lower B-pillar Trim, Removing And Installing
1
-
Lower B-pillar trim
Removing
-
Remove sill panel trim.
-
Spread lower B-pillar trim - 1 - in upper and lower area - arrows - at outer edge.
-
Remove lower B-pillar trim from body, Spring clips - 3 - and - 4 - disengage from door beam.
Installing
Installation is reverse of removal, but note the following:
-
Install sill panel trim.
-
Pull door seal lip - 2 - over trim edge on all door cut-outs.
2
-
Door seal
3
-
Spring clamp
-
Replace if damaged
4
-
Spring clamp
-
Replace if damaged