audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Glove Compartment Wiring Harness Routing and Securing|Page 17026 > < Glove Compartment Wiring Harness Routing and Securing|Page 17024
Page 1
background image

Utility Storage Compartment: Service and Repair
Cupholder or Storage Compartment In Center Console

3

Cup Holder

‹› Equipment-depending with or without lighting

Removing

-

Unclip switch trim - 4 -.

Cupholder without lighting:

-

Open cupholder - 3 -.

-

Press clips - arrows - down with a flat screwdriver. 

-

Remove cupholder - 3 - from upper center console -  1 -.

Cupholder with lighting:

-

Switch off all electrical components.

-

Remove ignition key.

-

Open cupholder - 3 -.

-

Press clips - arrows - down with a flat screwdriver. 

-

Remove cupholder - 3 - from upper center console -  1 - as far as possible.

-

Disconnect electrical connector.

Installing

To install, perform the steps used in removal in reverse order.

4

Switch Trim

‹› Clipped in

Glove Compartment Wiring Harness Routing and Securing|Page 17026 > < Glove Compartment Wiring Harness Routing and Securing|Page 17024