A3 L4-2.0L Turbo (BPY) (2006)
/Page-6184001.png)
Utility Storage Compartment: Service and Repair
Rear Central Locking Switch Mount
Rear Central Locking Switch Mount
Removing
-
Switch off ignition and remove ignition key.
-
Open ashtray cover.
-
Remove rear ashtray - 2 - from center console.
-
Remove switch mount - 1 - on upper edge in - direction of arrow - from locking mechanism.
-
Disengage switch mount at lower edge.
-
Disconnect the connector - 1 -.
-
Release clips in - direction of arrow - and remove switch - 2 - from mount.
Installing
To install, perform the steps used in removal in reverse order.