A3 L4-2.0L Turbo (BPY) (2006)
Power Mirror Switch: Service and Repair
Front Door Trim
Mirror Adjustment Switch
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim. Refer to => [ Front Door Trim ] .
-
Remove armrest. Refer to => [ Armrest ] See: Interior Moulding / Trim/Utility Storage Compartment/Service and Repair/Storage Compartments
and Covers/Center Armrest.
-
Carefully release retaining hooks - arrows - with a small screwdriver.
-
Remove mirror adjustment switch - 1 - downward out of switch mount.
Installing
Installation is reverse of removal, but note the following:
‹› When installing, ensure symbol trim is inserted before the mirror adjustment switch.
-
Press mirror adjustment switch into switch mount until retaining hooks engage.
-
Install armrest. Refer to => [ Armrest ] See: Interior Moulding / Trim/Utility Storage Compartment/Service and Repair/Storage Compartments and
Covers/Center Armrest.
-
Install door trim. Refer to => [ Front Door Trim ] .