A3 L4-2.0L Turbo (BPY) (2006)
Trunk / Liftgate Weatherstrip: Service and Repair
Rear Lid Seal
1
Rear lid seal
‹› Removal:
-
Unclip trim panels on - C - pillar and on roof.
-
Open rear lid and pull off seal at - C - pillar to the side
-
Pull off seal from body flange in longitudinal direction at roof and at rear cross panel on bottom.
-
When installing, vulcanized butt joint of seal must be located in center of vehicle.
-
Press seal - 1 - onto body flange as shown.
2
Rear Lid