A3 L4-2.0L Turbo (BPY) (2006)
-
Set control module onto hydraulic unit, without angling.
When doing this, seals will be moved to their end positions.
-
Screw together hydraulic unit and control module using the included new Torx bolts.
‹› A new control module may be installed a max. of two times to a used hydraulic unit, to ensure that the elastic gasket seals sufficiently.
‹› A used control module may not be installed a second time.
Bracket for ABS, removing and installing
In order to remove bracket for ABS/ESP, the ABS control module must first be removed => [ ABS Control Module and Hydraulic Unit ] See: ABS
Control Module and Hydraulic Unit, Mark 60.
-
Remove Phillips-head screw - 1 -.
-
Unclip line - 2 -.
-
Remove nut - 1 -, Tightening specification 20 Nm.