A3 L4-2.0L Turbo (BPY) (2006)
/Page-3546003.png)
10. Install the foam insulator at the rear of the frame channel as shown in Figure 5.
11. Install right side underbody cover. Tighten fasteners to 2 Nm (20 in.-lbs.).
12. Road test vehicle and verify noise is eliminated.
WARRANTY INFORMATION
REQUIRED PARTS AND TOOLS
ADDITIONAL INFORMATION
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
