A3 L4-2.0L Turbo (BPY) (2006)
Brake Caliper: Removal and Replacement
FS III Brake Caliper Assembly Overview
FS III Brake Caliper Assembly Overview
1 - Protective cap
2 - Bleeder screw, 10 Nm
‹› Apply a thin coat of lithium grease (G 052 150 A2) to threads before screwing in.
3 - Caps
‹› Insert into bushing
4 - Guide pins, 28 Nm
5 - Bushing
‹› Insert into brake caliper
6 - Brake caliper
7 - Protective seal
‹› Pull outer sealing lip onto piston
‹› Removing and installing => [ Piston, FN3 Brake Caliper ] See: Overhaul/Piston, FN3 Brake Caliper