A3 L4-2.0L Turbo (BPY) (2006)
/Page-3621002.png)
7 - Brake line, 14 Nm
^
Brake master cylinder/secondary piston circuit to hydraulic unit
8 - Brake line, 14 Nm
^
Brake master cylinder/primary piston circuit to hydraulic unit
9 - Sealing plugs
^
Coat with brake fluid and insert into brake master cylinder
10 - Brake fluid reservoir
^
Coat with brake fluid and insert into sealing plugs in brake master cylinder
^
With floating insert with integrated brake fluid level warning switch
^
To replace the warning switch, remove brake fluid reservoir
^
Press brake fluid reservoir into sealing plugs
11 - Cap
^
With integrated floater and brake fluid level warning switch
12 - Vacuum tube
^
With check valve
13 - Sealing plugs
Check inner boot at brake booster
-
Remove driver side storage tray.
-
Make sure boot did not slip out of circumferential groove, as shown here.
