A3 L4-2.0L Turbo (BPY) (2006)
/Page-1718004.png)
-
Install bolts - 1 to 8 - and tighten by hand.
-
Tighten bolts - 1 to 6 - diagonally in stages.
-
Tighten bolts - 7 to 8 -.
The rest of installation is in reverse order of removal, note the following:
-
Hook in intermediate plate at sealing flange and push it onto the alignment sleeves - arrows -.
-
Install dual-mass flywheel => [ Dual Mass Flywheel ] See: Transmission and Drivetrain/Flywheel/Service and Repair/Dual Mass Flywheel.
