A3 L4-2.0L Turbo (BPY) (2006)
Oil Cooler: Service and Repair
Oil Cooler
Special tools, testers and auxiliary items required
‹› Drip tray for workshop crane (VAS 6208)
‹› Spring-type clip pliers (VAS 5024 A)
Removing
CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.
-
Open cap of coolant expansion tank.
-
Remove engine cover and air filter. See: Intake Manifold/Service and Repair
-
Remove noise insulation
-
Drain engine coolant => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures
-
Remove intake manifold and fuel rail => Fuel Injection
and Ignition 24 Removal and Installation
-
Remove bracket for cable connector - arrows - from coolant pipe.
-
Disconnect coolant hose - 1 -.