A3 L4-2.0L Turbo (BPY) (2006)
/Page-1785004.png)
-
Disconnect crankcase ventilation pipe - 1 -.
-
Remove Ground (GND) cable - 2 - for oil pressure switch.
-
Remove bolts - arrows - and remove oil filter bracket.
Installing
Installation is in reverse order of removal, note the following:
^
Tightening torques refer to Oil filter bracket, assembly overview.
Note:
^
Always replace gaskets and seals.
^
Secure all hose connections using hose clamps appropriate for the model type.
-
Install oil baffle
-
Fill with coolant.
