A3 L4-2.0L Turbo (BPY) (2006)
‹› Note installation position: Thin rib on the camshaft gear points outward - arrows - and TDC marking on cylinder 1 is visible.
-
Install bolt for camshaft sprocket using retainer (3036).
‹› By turning the camshaft, the valves could contact the stationary pistons at TDC. Therefore, the pistons must not be at TDC. Valves/pistons may be
damaged.
-
Install toothed belt => [ Toothed Belt, without Divided Toothed Belt Guard ] See: Timing Components/Timing Belt/Service and Repair/Toothed
Belt, Without Divided Toothed Belt Guard or => [ Toothed Belt, with Divided Toothed Belt Guard ] See: Timing Components/Timing
Belt/Service and Repair/Toothed Belt, with Divided Toothed Belt Guard.