A3 L4-2.0L Turbo (BPY) (2006)
-
Now remove engine bracket upward from engine.
-
Mark rotational direction of toothed belt.
-
Loosen tensioning roller and remove toothed belt.
-
Then, turn crankshaft back slightly.
Installing
‹› Tightening specifications => [ Toothed Belt Drive Assembly Overview, with Divided Toothed Belt Guard ] See: Toothed Belt Drive Assembly
Overview, with Divided Toothed Belt Guard.
‹› When turning camshaft, crankshaft must not be at TDC. Valves and/or pistons may be damaged.
‹› The engine must be no more than warm to touch.
-
Position camshaft and crankshaft on TDC marking.
-
Place toothed belt onto crankshaft sprocket (observe direction of rotation).
-
Route toothed belt in sequence: Tensioning roller, camshaft gear, coolant pump and last over the relay pulley - arrow -.