A3 L4-2.0L Turbo (BPY) (2006)
-
Cut off nozzle on tube of sealant at front mark (dia. of nozzle approx. 2 mm).
-
Apply a thin bead of sealant to edge between cylinder block and oil pan - arrow -.
-
Apply a thin bead of sealant - arrow - to clean sealing surface of sealing flange, as shown in illustration.
^
Thickness of sealant bead: 2 to 3 mm.
CAUTION!
Risk of plugging oil pump strainer with excess sealant.
^
Do not apply sealant bead thicker than indicated.
Note: The sealant bead may not be thicker than 3 mm, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
-
Lightly coat lower sealing surface of sealing flange with sealant - shaded area -.