A3 L4-2.0L Turbo (BPY) (2006)
/Page-1859004.png)
-
Slowly turn the intake camshaft with the toothed belt tensioner tool (T10020) in direction of - arrow A - until the camshaft adjuster fits onto the
camshaft.
‹› If pin does not fit into notch: Remove chain and place the chain on again.
-
Replace camshaft adjuster mounting bolt.
-
Tighten camshaft adjuster screw. To do so, use socket insert (T40080).
-
Remove Locking Pin (T10115) - arrow B -.
