A3 L4-2.0L Turbo (BPY) (2006)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Ambient Air Temperature Sensor
Ambient Air Temperature Sensor
Observe notes on contact corrosion => [ Contact Corrosion ] See: Powertrain Management/Computers and Control Systems/Information Bus/Service
Precautions.
Removing
-
Remove front bumper cover Removal and Installation.
-
Disconnect the electrical connector - 2 -.
-
Carefully press the retaining clips together - arrow - and remove the outside air temperature sensor (G17) - item 1 - upward from the bracket.
Installing
Install in reverse order of removal, observing the following:
-
Install the front bumper cover Removal and Installation.