A3 L4-2.0L Turbo (BPY) (2006)
Evaporator Core: Service and Repair
Evaporator
-
Remove A/C unit. Refer to=> [ Heating & A/C Unit ] See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/Heating &
A/C Unit.
-
Remove attachments from heating & A/C unit. Refer to => [ Heating & A/C Unit Components, Manual A/C System ] See: Service and
Repair/Removal and Replacement/Heating & A/C Unit Components, Manual A/C System and => [ A/C Unit Components, Automatically
Regulated A/C System ] See: Service and Repair/Removal and Replacement/A/C Unit Components, Automatically Regulated A/C System.
-
Disassemble the A/C unit. Refer to => [ A/C Unit ] See: Service and Repair/Removal and Replacement/A/C Unit.
-
Disassemble evaporator housing. Refer to => [ Evaporator Housing ] See: Service and Repair/Removal and Replacement/Evaporator Housing.
-
Remove evaporator - A - from lower section of evaporator housing.
‹› Before inserting evaporator, check condensation water drain, clean if necessary.
‹› Before inserting evaporator, clean evaporator housing (and the evaporator if necessary).
-
When inserting evaporator - A - into lower section of evaporator housing and when assembling both housing halves, make sure the seal - F - is not
damaged.
-
Check seal - F - (it must be glued all around) before inserting evaporator.