A3 L4-2.0L Turbo (BPY) (2006)
Headlamp Bulb: Removal and Replacement
Low Beam Bulb
Halogen Headlamp, through 05.2008
Observe notes on contact corrosion => [ Contact Corrosion ] See: Service Precautions.
‹› After any measures that could affect headlamp aim, headlamps must be readjusted.
Low Beam Bulb
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Preparations for working on headlamps => [ Preparing to Work on Headlamps ].
-
Release retainer tab - arrow - and remove the low beam housing cover from headlamp housing.
-
Turn bulb socket - 1 - counterclockwise - arrow - and remove from headlamp housing.
-
Disconnect electrical harness connector - 2 - at bulb.
Installing
Install in reverse order of removal, noting the following: