A3 L4-2.0L Turbo (BPY) (2006)
-
Remove the headlamp range control positioning motor screws - 3 -.
Continuation for both sides:
-
Turn ignition coil - 2 - for gas-discharge lamp counter-clockwise - arrow - and detach.
‹› When rotating the ignition coil, the connector - 1 - will automatically come out of the connector housing.
‹› The ignition coil on the left headlamp can be removed only after the HID headlamp motor has been loosened.
-
Remove the retaining ring for the HID headlamp by turning it counter-clockwise - arrow -.
-
Remove gas discharge lamp from headlamp housing.
Installing
Install in reverse order of removal, noting the following:
-
Insert bulb in housing, taking care not to touch glass bulb with bare hands. Installation location:
‹› Upper tab at bulb socket must engage at recess for light bulb.
‹› The retaining ring can be installed in only one position.
-
Secure gas discharge lamp using retaining ring.
‹› Harness connector must only be connected with ignition coil installed.