A3 L4-2.0L Turbo (BPY) (2006)
-
Reach into front bumper opening and release lamp clip -1- in direction of -arrow-.
-
Press lamp housing -2- forward and remove from bumper cover.
-
Pull bulb holder -3- from lamp housing.
-
Remove bulb from bulb holder.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
When installing bulb holder, ensure proper seating. Water intrusion will damage headlamp.
-
Insert bulb in bulb holder.
-
Ensure marks -1- and -3- on bulb holder -2- align with marks -arrows- on housing -4-.
-
When installing lamp housing in bumper cover, clip engagement must be audible.