A3 L4-2.0L Turbo (BPY) (2006)
/Page-7214001.png)
Headlamp Switch: Service and Repair
Light Switch E1, Removing And Installing
Removing
-
Turn light switch to position "0".
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Push in light switch rotary knob -arrow 1- and simultaneously turn clockwise -arrow 2-.
-
Hold in this position.
-
Pull light switch out of switch housing -arrow 3 -.
-
Disconnect electrical connection.
Installing
Install in reverse order of removal, noting the following:
-
Press switch into switch housing until catch engages.
