A3 L4-2.0L Turbo (BPY) (2006)
-
Remove EVAP canister with connected lines upward - arrow - out of retainer and lay it aside.
Note: Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the
belt under operating conditions.
-
Mark direction of rotation of ribbed belt.
-
Pivot ribbed belt tensioner in direction of - arrow - to relieve tension on ribbed belt.
-
Secure tensioning element using Locking Pin T10060A.
-
Remove ribbed belt.
Installing
Installation is in reverse order of removal, note the following:
Note: Make sure, before installing ribbed belt, that all ancillaries (generator and A/C compressor) are secured tightly.