A3 L4-2.0L Turbo (BPY) (2006)
-
Disconnect the 26-pin connector - 1 - and the 40-pin connector - 2 - on the engine compartment E-box.
-
Remove nuts - 1 - and - 2 -.
-
Remove the engine compartment E-box - 3 - upward.
‹› The exact assignment of the engine compartment E-box can be found in the applicable wiring diagram.
Installing
Install in reverse order of removal, noting the following:
-
Install the fuse holder B (SB) => [ Relay and Fuse Holder B ] See: Relay and Fuse Holder B.
Vehicles with 4-Cylinder engine:
-
Install the battery tray => [ Battery Tray ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery Tray.
Vehicles with 6-Cylinder engine:
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Luggage
Compartment, Disconnecting and Connecting.
All Vehicles
-
Install the air filter housing: See: Engine, Cooling and Exhaust/Engine/Intake Manifold
Tightening Specifications