A3 L4-2.0L Turbo (BPY) (2006)
‹› For the sake of clarity, the illustrations show the heat shield - B - with the engine removed.
-
If present, disengage heat shield - B - from front wall of plenum chamber and set it aside (or remove it completely).
-
Remove bolts - A - (tightening torque 10 Nm).
-
Disconnect refrigerant lines - B - and - C -.
‹› Close all open lines and connections on expansion valve with suitable caps (avoid dirt and moisture from entering the system).
Installing
Installation is the reverse of removal, noting the following:
-
Replace O-rings seals - D - and - E - => [ Refrigerant Circuit O-Ring Seals ] See: Heating and Air Conditioning/Description and
Operation/Refrigerant Circuit O-Ring Seals